Beta releasesFeatures in BetaGetting startedWorkspacesProjects and compositionsImporting footageWorking with text and graphicsTextMotion GraphicsDrawing, painting, & pathsWorking with layersAnimation, keyframing, motion tracking, & keyingAnimationKeyframeMotion trackingKeyingTransparency and compositingAdjusting colorEffects & animation presetsExpressions và automationExpressionAutomationImmersive video, VR, & 3DViews và previewsRendering and exportingWorking with other applicationsMemory, storage, performance
màu sắc Difference Key effect
Note:

Though the màu sắc keying effects built into AfterEffects can be useful for some purposes, you should try keying withKeylight before attempting khổng lồ use these built-in keying effects.Some keying effects have been superseded by more modern effectslike Keylight.

Bạn đang xem: How to do a key or green screen effect in adobe after effects cs6


For information about keying in general, including links to tutorialsand other resources, see Keyingintroduction và resources.

The color Difference Key effect creates transparency from oppositestarting points by dividing an image into two mattes, Matte PartialA and Matte Partial B. Matte Partial B bases the transparency onthe specified key color, và Matte Partial A bases transparencyon areas of the image that don’t contain a second, different color.By combining the two mattes into a third matte, called the alpha matte,the color Difference Key creates well-defined transparency values.

The màu sắc Difference Key produces high-quality keying for allwell-lit footage items shot against a bluescreen or greenscreenand works especially well with images that contain transparent orsemitransparent areas, such as smoke, shadows, or glass.

This effect works with 8-bpc and 16-bpc color.


Use the color Difference Key effect


Select the layer that you want lớn makepartially transparent, and choose Effect > Keying > ColorDifference Key.
Note:

To use any of the eyedroppers in the Layer panel, chooseColor Difference Key from the View menu in the Layer panel.


In the Effect Controls panel, choose Matte Correctedfrom the View menu. To view và compare the source image, both partialmattes, và the final matte at the same time, choose Corrected, Final from the View menu. Other views available in theView thực đơn are described in step 10.
Select the appropriate key color: khổng lồ key out a bluescreen,use the default xanh color. Lớn key out a nonblue screen, selecta key màu sắc in one of the following ways:

Thumbnail eyedropper: Select và then click in the Composition panel or the original thumbnail image on an appropriate area.

Key màu sắc eyedropper: Select và then click in the Composition or Layer panel on an appropriate area.

Key màu sắc swatch: Click lớn select a color from the specified màu sắc space.


Note:

The eyedropper tools move the sliders accordingly. Use the sliders in step 9 to fine-tune the keying results.


Click the mattebutton to display the final combined matte in the matte thumbnail.
Select the đen eyedropper, và then click inside thematte thumbnail on the lightest area of đen to specify transparentregions. The transparency values in the thumbnail và Compositionpanel are adjusted.
Select the white eyedropper, & then click inside thematte thumbnail on the darkest area of white khổng lồ specify opaque regions.The opaque values in the thumbnail & the Composition panel areadjusted.
Note:

To produce the best possible key, makethe black and white areas as different as you can so that the imageretains as many shades of gray as possible.


Select a matching accuracy from the màu sắc Matching Accuracymenu. Choose Faster unless you use a screen that isn’t a primarycolor (red, blue, or yellow). For those screens, choose More Accurate,which increases rendering time but produces better results.
to lớn further adjust transparency values, repeat steps 5and 6 for one or both of the partial mattes. Click the Partial MatteB button or the Partial Matte A button khổng lồ select a partial matte,and then repeat the steps.
Adjust transparency values for each partial matte andfor the final matte by dragging one or more of the following slidersin the Matte Controls section:

Black sliders adjust the transparency levelsof each matte. You can adjust the same levels using the black eyedropper.

White sliders adjust the opaque levels of each matte.You can adjust the same levels using the trắng eyedropper.

Gamma sliders control how closely the transparencyvalues follow a linear progression. At a value of 1 (the default),the progression is linear. Other values produce nonlinear progressionsfor particular adjustments or visual effects.


When adjusting individual mattes, choose from the Viewmenu lớn compare the mattes with và without adjustments:

Choose Uncorrected khổng lồ view a matte withoutadjustments.

Choose Corrected lớn view a matte with all adjustments.


Before closing the Effect Controls panel, select FinalOutput from the View menu. Final output đầu ra must be selected for AfterEffects to render the transparency.
Note:

To remove traces of reflected key colorfrom the image, apply Spill Suppressor using Better For màu sắc Accuracy.If the image still has a lot of color, apply the Simple Choker orMatte Choker effect.


color Key effect
Note:

Starting with the October 2013 release of After Effects CC, the màu sắc Key effect has been moved khổng lồ the Obsolete effects category. Use other effects such as the Keylight effect instead.


For information about keying in general, including link to tutorialsand other resources, see Keyingintroduction và resources.

The màu sắc Key effect keys out all image pixels that are similarto a specified key color. This effect modifies only the alpha channelof a layer.

This effect works with 8-bpc & 16-bpc color.


Key out a single màu sắc with theColor Key effect


Select the layer that you want to lớn makepartially transparent, & choose Effect > Keying > ColorKey.
In the Effect Controls panel, specify a key màu sắc inone of two ways:

Click the Key màu sắc swatch to open theColor dialog box and specify a color.

Click the eyedropper, và then click a color onthe screen.


Drag the màu sắc Tolerance slider to specify the rangeof color to key out. Lower values key out a smaller range of colorsnear the key color. Higher values key out a wider range of color.
Drag the Edge Thin slider khổng lồ adjust the width of theborder of the keyed area. Positive values enlarge the mask, increasingthe transparent area. Negative values shrink the mask, decreasingthe transparent area.
Drag the Edge Feather slider khổng lồ specify the softnessof the edge. Higher values create a softer edge but take longerto render.
màu sắc Range effect
Note:

Though the color keying effects built into AfterEffects can be useful for some purposes, you should try keying withKeylight before attempting to use these built-in keying effects.Some keying effects have been superseded by more modern effectslike Keylight.


For information about keying in general, including links to tutorialsand other resources, see Keyingintroduction & resources.

The màu sắc Range effect creates transparency by keying out a specifiedrange of colors in either the Lab, YUV, or RGB color space. Youcan use this key on screens that consist of more than one coloror on bluescreens or greenscreens that have been unevenly lit andcontain different shades of the same color.

This effect works with 8-bpc color.


*
Poorly lit greenscreen (upper-left) and background layer (lower-left)are combined using màu sắc Range Key (lower-right).

Use the màu sắc Range effect


Select the layer that you want lớn makepartially transparent, & choose Effect > Keying > ColorRange.
Choose Lab, YUV, or RGB from the màu sắc Space menu. Ifyou have trouble isolating the subject using one color space, tryusing a different one.
Select the Key màu sắc eyedropper, & then click in thematte thumbnail lớn select the area that corresponds lớn a color inthe Composition panel you want lớn make transparent. Typically, thisfirst color is the one that covers the largest area of the image.
Note:

To use the eyedroppers in the Layer panel, choose ColorRange from the View thực đơn in the Layer panel.


Select the plus eyedropper, and then click other areasin the matte thumbnail to địa chỉ cửa hàng other colors or shades to lớn the rangeof colors keyed out for transparency.
Select the minus eyedropper, và then click areas inthe matte thumbnail to lớn subtract other colors or shades from therange of colors keyed out.
Drag the Fuzziness slider lớn soften the edges betweentransparent & opaque regions.
Use the sliders in the Min & Max controls to fine-tunethe color range you selected with the plus and minus eyedroppers.The L, Y, R sliders control the first component of the specifiedcolor space; the a, U, G sliders control the second component; andthe b, V, B sliders control the third component. Drag the Min slidersto fine-tune the beginning of the color range. Drag the Max slidersto fine-tune the end of the màu sắc range.
Difference Matte effect

The Difference Matte effect creates transparency bycomparing a source layer with a difference layer, and then keyingout pixels in the source layer that match both the position andcolor in the difference layer. Typically, it’s used lớn key out a staticbackground behind a moving object, which is then placed on a different background.Often the difference layer is simply a frame of background footage (beforethe moving object has entered the scene). For this reason, the Difference Matteeffect is best used for scenes that have been shot with a stationarycamera & an unmoving background.

This effect works with 8-bpc & 16-bpc color.


*
Difference Matte Key effect

A. Original image B. Backgroundimage C. New background image D. Finalcomposite image


Use the Difference Matte effect


Select a motion footage layer as thesource layer.
Import the image tệp tin into After Effects, and showroom itto the composition.

The imported image becomes the difference layer. Make surethat its duration is at least as long as the duration of the sourcelayer.


Note:

If the shot doesn’t contain a full background frame,you may be able lớn assemble the full background by combining partsof several frames in After Effects or Photoshop. For example, youcan use the Clone Stamp tool to lớn take a sample of the backgroundin one frame, & then paint the sample over part of the backgroundin another frame.


Turn off the display of the difference layer by clickingthe clip switch in the Timeline panel.
Make sure that the original source layer is selected,and then choose Effect > Keying > Difference Matte.
Select the background file from the Difference Layermenu.
If the difference layer isn’t the same kích thước as the sourcelayer, choose one of the following controls from the If Layer SizesDiffer menu:

Center


Places the difference layer in the center of the sourcelayer. If the difference layer is smaller than the source layer,the rest of the layer fills with black.


Stretch lớn Fit


Stretches or shrinks the difference layer to lớn the sizeof the source layer. Background images may become distorted.


Adjust the Matching Tolerance slider to lớn specify the amountof transparency based on how closely colors must match between thelayers. Lower values produce less transparency; higher values producemore transparency.
Adjust the Matching Softness slider to soften the edgesbetween transparent và opaque areas. Higher values make matchedpixels more transparent but don’t increase the number of matchingpixels.
If the matte still contains extraneous pixels, adjustthe Blur Before Difference slider. This slider suppresses noiseby slightly blurring both layers before the comparison is made.
Note:

The blurring occurs only for the comparison and doesn’tblur final output.


Before closing the Effect Controls panel, make sure toselect Final output đầu ra from the View menu lớn ensure that After Effectsrenders the transparency.
Extract effect

The Extract effect creates transparency by keying outa specified brightness range, based on a histogram of a specifiedchannel. It’s best used to create transparency in an image shotagainst a black or trắng background or against a background thatis dark or bright but consists of more than one color.


Note:

The controls for this effect are similar to the controls ofthe Extract effect in 12guns.vn Premiere Pro, but the purpose và resultsof the effect are different.

Xem thêm: Hướng Dẫn Cách Tính Ngày Nghỉ Phép Năm Mới Nhất, Cách Tính Ngày Nghỉ Phép Năm Mới Nhất


This effect works with 8-bpc and 16-bpc color.


Use the Extract effect


In the Effect Controls panel, the Extracteffect displays a histogram for a channel specified in the Channelmenu. The histogram displays a representation of the brightnesslevels in the layer, showing the relative number of pixels at eachlevel. From left to right, the histogram extends from the darkest(a value of 0) khổng lồ the lightest (a value of 255).

Using thetransparency control bar beneath the histogram, you can adjust the rangeof pixels that are made transparent. The position và shape of thebar in relation khổng lồ the histogram determine transparency. Pixelscorresponding to lớn the area covered by the bar remain opaque; pixelscorresponding to lớn the areas not covered by the bar are made transparent.


Select the layer you want lớn make partially transparent,and choose Effect > Keying > Extract.
If you are keying out bright or dark areas, choose Luminancefrom the Channel menu. To lớn create visual effects, choose Red, Green,Blue, or Alpha.
Adjust the amount of transparency by dragging the transparencycontrol bar in the following ways:

Drag the upper right or upper left selection handles to adjust the length of the bar and to shorten or lengthen the transparency range. You can also adjust the length by moving the white Point và Black Point sliders. Values above the trắng point & below the đen point are made transparent.

Drag the lower right or lower left selection handles to taper the bar. Tapering the bar on the left affects the softness of transparency in the darker areas of the image; tapering it on the right affects the softness in the lighter areas. You can also adjust the softness levels by adjusting white Softness (lighter areas) & Black Softness (darker areas).


Note:

to lớn taper the edges of the transparency control bar, first shorten the transparency bar.


Drag the entire bar left or right lớn position it under the histogram.
Inner/Outer Key effect
Note:

Though the màu sắc keying effects built into AfterEffects can be useful for some purposes, you should try keying withKeylight before attempting to use these built-in keying effects.Some keying effects have been superseded by more modern effectslike Keylight.


For information about keying in general, including links to tutorialsand other resources, see Keyingintroduction and resources.

The Inner/Outer Key effect isolates a foreground object fromits background.

This effect works with 8-bpc và 16-bpc color.


Use the Inner/Outer Key effect


To use the Inner/Outer key, create a maskto define the inside và outside edge of the object you want toisolate. The mask can be fairly rough—it doesn’t need to lớn fit exactlyaround the edges of the object.

In addition to lớn masking asoft-edged object from its background, Inner/Outer Key modifiesthe colors around the border lớn remove contaminating background colors.This màu sắc decontamination process determines the contribution ofthe background to the màu sắc in each border pixel, & then removesthat contribution—thus removing the halo that can appear if a soft-edgedobject is matted against a new background.


Select the border of the object that you wantto extract by doing one of the following:

Draw a single closed mask near the border of the object; then select the mask from the Foreground menu & leave the Background menu set khổng lồ None. Adjust the Single Mask Highlight Radius lớn control the kích thước of the border around this mask. (This method works well only on objects with simple edges.)

Draw two closed masks: an inner mask just inside the object, và an outer mask just outside the object. Make sure that any fuzzy or uncertain areas of the object lie within these two masks. Select the inner mask from the Foreground menu và the outer mask from the Background menu.


Note:

Make sure that the mask mode for all masks is set to lớn None.


If you want, move the masks around to lớn find the locationthat provides the best results.
to lớn extract more than one object, or lớn create a holein an object, draw additional masks & then select them from theAdditional Foreground & Additional Background menus. For example,to key out a person’s hair blowing in the wind against a blue sky,draw the inner mask inside the head, draw the outer mask aroundthe outside edge of the hair, & then draw an additional mask aroundthe gap in the hair where you can see sky. Select the additional maskfrom the Additional Foreground menu to lớn extract the gap và remove thebackground image.
Create additional mở cửa or closed masks lớn clean up otherareas of the image, và then select them from the Cleanup Foregroundor Cleanup Background menu. Cleanup Foreground masks increase theopacity along the mask; Cleanup Background masks decrease the opacityalong the mask. Use the Brush Radius & Brush Pressure optionsto control the size and density of each stroke.
Note:

You can select the Background (outer) mask as a CleanupBackground mask khổng lồ clean up noise from the background portions ofthe image.


set Edge Thin to specify how much of the border of thematte is affected by the key. A positive value moves the edge awayfrom the transparent region, increasing the transparent area; anegative value moves the edge toward the transparent region andincreases the size of the foreground area.
Increase the Edge Feather values khổng lồ soften edges of thekeyed area. High Edge Feather values take longer lớn render.
Specify the Edge Threshold, which is a soft cutoff forremoving low-opacity pixels that can cause unwanted noise in theimage background.
Select Invert Extraction to lớn reverse the foreground andbackground regions.
phối Blend With Original to specify the degree lớn whichthe resulting extracted image blends with the original image.
Linear color Key effect
Note:

Though the color keying effects built into AfterEffects can be useful for some purposes, you should try keying withKeylight before attempting to use these built-in keying effects.Some keying effects have been superseded by more modern effectslike Keylight.


For information about keying in general, including links to tutorialsand other resources, see Keyingintroduction và resources.

Linear keys create a range of transparency acrossan image. A linear key compares each pixel in the image lớn the keycolor you specify. If the màu sắc of a px closely matches the keycolor, it becomes completely transparent. Pixels that don’t matchas well are made less transparent, & pixels that don’t match atall remain opaque. The range of transparency values, therefore,forms a linear progression.

The Linear color Key effect uses RGB, hue, or chroma informationto create transparency from a specified key color.

This effect works with 8-bpc, 16-bpc, and 32-bpc color.


Apply the Linear color Key effect


In the Effect Controls panel, the Linear ColorKey effect displays two thumbnail images; the left thumbnail imagerepresents the unaltered source image, and the right thumbnail imagerepresents the view you’ve selected in the View menu.

Youcan adjust the key color, the matching tolerance, và the matchingsoftness. The matching tolerance specifies how closely pixels mustmatch the key màu sắc before they start becoming transparent. Thematching softness controls the softness of edges between the imageand the key color.

You can also reapply this key to lớn preservea màu sắc that was made transparent by the first application of thekey. For example, if you key out a medium-blue screen, you may losesome or all of a light-blue piece of clothing your subject is wearing. Youcan bring back the light-blue color by applying another instanceof the Linear màu sắc Key and choosing Keep This màu sắc from the KeyOperation menu.


Select a layer as the source layer, and then chooseEffect > Keying > Linear màu sắc Key.
In the Effect Controls panel, choose Key Colors fromthe Key Operation menu.
Choose a màu sắc space from the Match Colors menu. In mostcases, use the mặc định RGB setting. If you have trouble isolatingthe subject using one màu sắc space, try using a different màu sắc space.
Select a key color in one of the following ways:

Select the Thumbnail eyedropper, and thenclick an appropriate area in the Composition panel or the originalthumbnail image.

Select the Key màu sắc eyedropper, & then clickan appropriate area in the Composition or Layer panel.

To preview transparency for different colors, selectthe Key color eyedropper, hold down the alt key (Windows) or Optionkey (Mac OS), & move the pointer khổng lồ different areas in the Compositionpanel or the original thumbnail image. The transparency of the imagein the Composition panel changes as you move the pointer over differentcolors or shades. Click khổng lồ select the color.

Click the Key color swatch to lớn select a color fromthe specified color space. The selected color becomes transparent.

note: Theeyedropper tools move the sliders accordingly. Use the sliders insteps 6 và 7 khổng lồ fine-tune the keying results. To lớn use eyedroppersin the Layer panel, choose Linear màu sắc Key from the View thực đơn inthe Layer panel.


Adjust matching tolerance in one of the following ways:

Select the Plus (+) or the Minus (-) eyedropper,and then click a color in the left thumbnail image. The Plus eyedropperadds the specified màu sắc to the key color range, increasing thematching tolerance and the cấp độ of transparency. The Minus eyedroppersubtracts the specified color from the key màu sắc range, decreasingthe matching tolerance và the level of transparency.

Drag the matching tolerance slider. A value of 0makes the entire image opaque; a value of 100 makes the entire imagetransparent.


Drag the Matching Softness slider khổng lồ soften the matchingtolerance by tapering the tolerance value. Typically, values under20% produce the best results.
Before closing the Effect Controls panel, make sure toselect Final output from the View menu to lớn ensure that After Effectsrenders the transparency.

Preserve a color after applyingLinear màu sắc Key


In the Effect Controls panel or Timelinepanel, turn off any current instances of keys or matte effects bydeselecting the Effect option to the left of the key name or toolname. Deselecting the option causes the original image lớn appearin the Composition panel so that you can select a màu sắc to preserve.
Choose Effect > Keying > Linear màu sắc Key. A secondset of Linear color Key controls appears in the Effect Controlspanel below the first set.
In the Effect Controls panel, choose Keep Colors fromthe Key Operation menu.
Select the color you want to lớn keep.
In the first application of the Linear màu sắc Key effect,choose Final đầu ra from the View thực đơn in the Effect Controls panel,and then turn other instances of the Linear màu sắc Key effect backon to lớn examine the transparency. You may need to adjust colors orreapply the key a third time to lớn get the results you need.
Luma Key effect
Note:

Starting with the October 2013 release of After Effects CC, the Luma Key effect has been moved to the Obsolete effects category and users are recommended to use other effects such as the Keylight effect.


For information about keying in general, including linksto tutorials and other resources, see Keyingintroduction and resources.

The Luma Key effect keys out all the regions of a layer witha specified luminance or brightness. The chất lượng setting of thelayer doesn’t influence the Luma Key effect.

Use this effect if the object from which you want lớn create amatte has a greatly different luminance value than its background.For example, if you want lớn create a matte for musical notes ona trắng background, you can key out the brighter values; the darkmusical notes become the only opaque areas.

This effect works with 8-bpc and 16-bpc color.


*
white background of original (upper-left & lower-left) isremoved using Luma Key and composited over underlying layer (lower-right).

Key out a luminance value withthe Luma Key effect


Select the layer that you want khổng lồ makepartially transparent, and choose Effect > Keying > Luma Key.
Select a Key Type to specify the range to lớn be keyed out.
Drag the Threshold slider in the Effect Controls panelto phối the luminance value you want the matte to lớn be based on.
Drag the Tolerance slider to specify the range of valuesto be keyed out. Lower values key out a smaller range of valuesnear the threshold. Higher values key out a wider range of values.
Drag the Edge Thin slider lớn adjust the width of theborder of the keyed area. Positive values make the mask grow, increasingthe transparent area. Negative values shrink the mask.
Drag the Edge Feather slider lớn specify the softnessof the edge. Higher values create a softer edge but take longerto render.
Spill Suppressor effect
Note:

Starting with the June 2014 release of After Effects CC, the Spill Suppressor effect has been moved to lớn the Obsolete effects category and users are recommended khổng lồ use the Advanced Spill Suppressor effect.


Key Cleaner và Advanced Spill Suppressor effect

Key Cleaner effect


The Key Cleaner effect recovers alpha-channel detail from a scene keyed by a typical keying effect, including recovering detail lost due to compression artifacts.


Note:

If you see that unwanted semi-transparency effects have crept in along edges that should be sharp, use an effect mask (with a little mask feather) khổng lồ restrict the Key Cleaner effect to lớn the intended area.


Advanced Spill Suppressor effect


The Advanced Spill Suppressor effect removes màu sắc spill on a foreground subject from a colored background used for màu sắc keying.


The Advanced Spill Suppressor effect has two methods for spill suppression:

Standard - The Standard method is simpler, automatically detects the dominant key color, và requires less user input.

An easy way of applying these effects is by using the Keylight + Key Cleaner + Spill Suppressor animation preset.


Note:

Starting with the June năm trước release of After Effects CC, the Spill Suppressor effect has been moved to the Obsolete effects category và users are recommended lớn use the Advanced Spill Suppressor effect.


Keylight effect


After Effects includes several built-in keying effects,as well as the Academy Award–winning Keylight effect, which excelsat professional-quality màu sắc keying. For information on the Keylighteffect, see its documentation in the thư mục in which the Keylightplug-in is installed. (See Plug-ins.)


For information about keying in general, including liên kết to tutorials và other resources, see Keying introduction and resources.


Note:

The Key màu sắc property is already linked with an expression lớn the Keylight effect"https://12guns.vn/key-12guns.vn-after-effects-cs6/imager_8_8506_700.jpgs Screen Colour property, so you don"https://12guns.vn/key-12guns.vn-after-effects-cs6/imager_8_8506_700.jpgt need to change it unless you want lớn use a different màu sắc for the despill process. Khổng lồ use a different màu sắc for the despill process, just disable or remove the Keylight expression.


See Third-partyplug-ins included with After Effects.


Using the Keylight + Key Cleaner + Advanced Spill Suppressor animation preset


*
Keylight, Key Cleaner, và Advanced Spill Suppressor effects
*
Keylight preset

Follow the steps below khổng lồ apply the Keylight effect with the Key Cleaner & Advanced Spill Suppressor effect:


Use the Keylight + Key Cleaner + Advanced Spill Suppressor animation preset (in the Image-Utlities folder under Animation Presets) khổng lồ apply the three effects in order to lớn the layer.The Advanced Spill Suppressor effect is turned off by mặc định to allow you to sample the key màu sắc in the Keylight effect or if the footage does not have any màu sắc spill khổng lồ be removed. Use the Keylight effect"https://12guns.vn/key-12guns.vn-after-effects-cs6/imager_8_8506_700.jpgs Screen Colour eyedropper lớn sample the key màu sắc from the layer in the Composition panel. Adjust other Keylight effect settings as you normally would lớn get the best results. Turn on the effect switch for the Advanced Spill Suppressor effect to lớn remove màu sắc spill from the scene, if required.
Note:

If you see unwanted semitransparency along edges that should be sharp, use an effect mask (with a little bit of mask feather) to restrict Key Cleaner lớn the intended area.

See variable-width mask feathering & soften the edges of a mask articles for information on mask feathering


Using Key Cleaner và Advanced Spill Suppressor effects with other keying effects


Follow the steps below lớn apply the Key Cleaner và Advanced Spill Suppressor effect lớn a keying effect other than the Keylight effect:

Apply the keying effect to the layer. Mix the effect lớn the equivalent of the Keylight effect"https://12guns.vn/key-12guns.vn-after-effects-cs6/imager_8_8506_700.jpgs Indeterminate Result setting, so that the keying effect gives the full RGB result without attempting to lớn perform its own spill suppression. Apply the Key Cleaner effect after the keying effect. Apply the Advanced Spill Suppressor effect after the Key Cleaner effect.
Learn Tutorial

Watch this video to learn how khổng lồ get better keying results from compressed or badly shot green-screen footage with the new Key Cleaner effect và remove color spill with the Advanced Spill Suppressor controls.


*

More like this


*

Sign in lớn your account


Sign in
*

Manage trương mục

Quick links

View all your plans Manage your plans

Legal Notices | Online Privacy Policy


*
12guns.vn After Effects

Ask the Community

Post questions và get answers from experts.